transistors 1 publication date: september 2007 sjd00341aed this product complies with the rohs directive (eu 2002/95/ec). 2SD1511G silicon npn epitaxial planar type darlington for low-frequency output amplification features ? forward current transfer ratio h fe is designed high, which is appro- priate to the driver circuit of motors and printer hammer: h fe = 4 000 to 20 000. ? a shunt resistor is omitted from the driver. ? mini power type package, allowing downsizing of the equipment and automatic insertion through the tape packing and the maga- zine packing. absolute maximum ratings t a = 25 c electrical characteristics t a = 25 c 3 c note) 1. measuring methods are based on japanese industrial standard jis c 7030 measuring methods for transistors. 2. * 1: pulse measurement * 2: rank classification rank q r s h fe 4 000 to 10 000 8 000 to 20 000 16 000 to 40 000 parameter symbol rating unit collector-base voltage (emitter open) v cbo 100 v collector-emitter voltage (base open) v ceo 80 v emitter-base voltage (collector open) v ebo 5v collector current i c 1a peak collector current i cp 1.5 a collector power dissipation * p c 1w junction temperature t j 150 c storage temperature t stg ? 55 to + 150 c parameter symbol conditions min typ max unit collector-base voltage (emitter open) v cbo i c = 100 a, i e = 0 100 v collector-emitter voltage (base open) v ceo i c = 1 ma, i b = 080v emitter-base voltage (collector open) v ebo i e = 100 a, i c = 05 v collector-base cutoff current (emitter open) i cbo v cb = 25 v, i e = 0 100 na emitter-base cutoff current (collector open) i ebo v eb = 4 v, i c = 0 100 na forward current transfer ratio * 1, 2 h fe v ce = 10 v, i c = 1 a 4 000 40 000 ? collector-emitter saturation voltage * 1 v ce(sat) i c = 1 a, i b = 1 ma 1.8 v base-emitter saturation voltage * 1 v be(sat) i c = 1 a, i b = 1 ma 2.2 v transition frequency f t v cb = 10 v, i e = ? 50 ma, f = 200 mhz 150 mhz b c e 200 ? note) * : printed circuit board: copper foil area of 1 cm 2 or more, and the board thickness of 1.7 mm for the collector portion package ? code minip3-f2 ? pin name 1: base 2: collector 3: emitter marking symbol: p internal connection maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
2SD1511G 2 sjd00341aed this product complies with the rohs directive (eu 2002/95/ec). v be(sat) ? i c h fe ? i c c ob ? v cb p c ? t a i c ? v ce v ce(sat) ? i c 0 200 160 40 120 80 0 1.2 1.0 0.8 0.6 0.4 0.2 copper plate at the collector is more than 1 cm 2 in area, 1.7 mm in thickness collector power dissipation p c ( w ) ambient temperature t a ( c ) 010 8 26 4 0 2.4 2.0 1.6 1.2 0.8 0.4 t a = 25 c i b = 200 a 40 a 60 a 80 a 180 a 160 a 140 a 120 a 100 a collector current i c ( a ) collector-emitter voltage v ce ( v ) 0.01 0.1 1 10 0.01 0.1 1 10 100 i c / i b = 1 000 25 c 75 c t a = ? 25 c collector-emitter saturation voltage v ce(sat) ( v ) collector current i c ( a ) 0.01 0.1 1 10 0.01 0.1 1 10 100 i c / i b = 1 000 t a = ? 25 c 25 c 75 c base-emitter saturation voltage v be(sat) ( v ) collector current i c ( a ) 0.01 0.1 1 10 10 100 1 000 10 000 100 000 v ce = 10 v t a = 75 c 25 c ? 25 c forward current transfer ratio h fe collector current i c ( a ) 1 10 100 0 30 25 20 15 10 5 i e = 0 f = 1 mhz t a = 25 c collector-base voltage v cb ( v ) collector output capacitance (common base, input open circuited) c ob (pf) maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
2SD1511G 3 sjd00341aed this product complies with the rohs directive (eu 2002/95/ec). minip3-f2 unit: mm 1.60 0.20 4.50 0.10 4.00 0.20 0.40 0.08 0.50 0.08 1 2 3 2.60 0.10 0.50 max. 3.00 0.15 (5 ) 1.50 0.10 2.50 0.10 0.41 0.03 1.50 0.10 1.00 0.10 (45 ) (5 ) maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
|
